Quantum Med Marine
Home
Systems
Thrusters
Stabilizers
News
Tech Edge
Sales
Contact
 
Click for Larger w/ Measurements
Click for Larger with Measurements
 
Quantum Controls for yacht, marine and boat stabilization
Fin Actuators
Model 800
Fin Actuator

Stabilizer Fin Actuators-  QC 800   QC 1000  QC 1500   QC 1800   QC 2200

Model 800 Fin Actuator
     Quantum Controls ships complete actuator assemblies ready to install, without the need for disassembly and reassembly. Quantum Controls innovations include a tiller arm engineered for easy service, modern hydraulic components, simple locking devices, improved seal and bearing design, a housing manufactured from a solid block of space-age aluminum alloy, and the legendary Quantum fit, finish, and attention to detail. Gleaming stainless polished for presentation in the finest engine rooms, carbon fiber housing, and linear bonded polyurethane enamel- all part of the Quantum Controls QC Series.

     The QC 800 series fits vessels ranging in size from 15m (49.2 ft.) to 30m (98.4 ft.). Quantum Controls determines the precise configuration for maximum performance from your vessel information.  
 
• Each unit assembled and fully tested prior to shipment
• Rigorous quality control
• Only the highest quality hydraulic components, from valves to cylinders
• Legendary Quantum technical support
• Quantum's world-famous two year warranty

 

Technical Data:
 
Fin attachment: Hydraulic coupling for maximum strength
and ease of service
Main shaft: 80mm diameter, special stainless steel heat treated
Main cylinder housing material: Aluminum
Lower bearing: Glass reinforced Teflon
Top bearing: SKF self adjusting roller bearing
Lower seal: QC Anti-barnacle lower seal in stainless steel ring
Main seal: 80 x 100 x 13mm Teflon filled
Centering bolts: M30
Recommended grease: SKF LGGB-2
Lubrication: Two independent grease chambers
  • Lower chamber for biodegradable grease
  • Top chamber for heavy duty grease
Hydraulic connection: M16x1.5
Cylinder pins: 25 mm diameter
Overall weight: 210 kg (462 lbs)
Overall dimensions: See Drawing
 
Hydraulic Cylinder 800
 
Hydraulic cylinder material: Steel
Rod end connection: Spherical bearing
Piston diameter: 40mm
Rod diameter: 25mm
Piston stroke: 150mm
Overhaul length closed: 370mm
Max working pressure: 210bar
 
 
Tiller Arm
 
Material: St. 52 high strength steel with zinc end plates for maximum corrosion resistance
Attachment method: Module 3 type, 42 tooth clamped (M 12 bolts)
Cylinder pins: Case hardened, press fit and fitted with locking plate to prevent axial movement.
Offset: Increases maximum deflection to 45 degrees for highest performance
 
 
{ Home | Systems | Thrusters | Stabilizers | News | Tech Edge | Sales | Contact | Email }
 
 
Quantum-Med Marine Ltd.
Castle Emplacement
St. Peter Port, Guernsey
Channel Islands GY1 1AU
Phone: 00 44 (0)1481 715 399
Fax: 00 44 (0)1481 715 362
Email- npiper@quantum-medmarine.com